Reliable Kennewick Insulation Services
Request an estimate

Commercial insulation in Kennewick, WA - a building that holds its heat in winter

Drafty offices, a shop that won't stay warm or bills that keep climbing? We insulate roofs and walls so the building keeps its heat.

Request an estimate(509) 396-5461
Two workers in protective suits spray foam insulation along the edge of a rooftop, with a hose-fed spray gun.
  • Fully licensed and insured.
  • Free on-site estimates.
  • Expect a reply within 1 business day.

Commercial insulation for roofs and walls

  • Roof and attic insulation

    Insulation goes either above the roof deck or across the attic floor, depending on how the roof is built, and that build decides which one your building gets.

  • Wall insulation across the framing

    This insulation runs across the studs as well as between them, so heat has fewer paths through the frame. It works best on new walls or walls opened for remodeling.

What does commercial insulation involve for a Kennewick building?

Commercial insulation in Kennewick means insulating the roofs, walls and floors of offices, shops and other business buildings so they hold heat in winter and keep it out in summer, which cuts what you spend running the heat and air.

Most of these calls start with a shop that won't hold heat, an office that's cold along the outside wall or power bills that keep going up. The price turns on the roof type, the size of the building, the wall method and how easily we can reach each space, and the schedule usually turns on the other trades still running wiring, pipes or ducts through the building. If the floors run cold over a crawl space, crawl space insulation may belong in the same job. Your written estimate lists each step in the order we'd do it and why it comes there.

Commercial insulation, from the roof to the crawl space

We decide what a building needs from how it's used, how the roof is built and what other trades still have to run through it, then write it down so you can see the reasoning.

  • A bid you can compare

    We write out what goes into each roof, wall and floor and how it goes in, so a manager or owner can compare bids fairly.

  • Planning around other trades

    We plan our work around electricians, plumbers and HVAC crews still running wiring, pipes or ducts, so finished insulation doesn't get torn out later.

  • Sealing, then insulating

    We close the gaps around pipes, ducts and hatches first, then insulate to full depth all the way out to the edges, where coverage usually runs thin.

  • Crawl spaces and vapor barriers

    Over a crawl space we lay a crawl space vapor barrier to keep ground moisture out, and we do vapor barrier installation where walls need one.

Why businesses choose Reliable Kennewick Insulation Services

What I care about most is the work nobody sees once we leave, like the far end of a roof cavity. I want you to understand what you're paying for before you agree to it. Request an estimate or call (509) 396-5461.

Request an estimate

  • I look at every job myself

    I come out to see each building before we write a bid. Our installers do the work, and I check it before we finish.

  • In business since 2013

    We've been insulating attics, crawl spaces and business buildings for 13 years. We're best known for sealing the gaps before any insulation goes in.

  • Fully licensed and insured

    We're fully licensed and insured. If something in the building needs fixing before we can start, I'll tell you plainly rather than work around it.

What happens when you call about commercial insulation in Kennewick?

We plan commercial work around your hours, your staff or tenants and the trades still working in the building, and the order of the job is written down before anyone starts.

Request an estimate

or call (509) 396-5461

  1. Call or send the form

    Call (509) 396-5461 or send the form, and we'll set a time for me to come out and see the building.

  2. I look at the space

    I go through the roof, the walls and any crawl space, and I ask how the building has been behaving, such as cold spots, drafts or climbing bills.

  3. Your written estimate

    You get a written estimate that lists each step in order and why it comes there. Our installers do the work, and I check it before we call it done.

A worker blows loose white insulation into an attic among exposed wooden rafters.

Get a written estimate for insulating your building

Tell us your roof type, how the building is used and any electrical, plumbing or HVAC work still planned. We reply within one business day to set up a free on-site estimate, and there's no pressure to book.

(509) 396-5461

Questions owners ask before they hire

How much does commercial insulation cost in Kennewick, WA?

There's no set price, because we price commercial insulation in Kennewick building by building from what we see on the visit. The roof type, the size of the building, the wall method and how much we have to work around other trades all move the number. Foam costs more and seals air as it insulates, while sealing the gaps and topping up loose fill usually comes out ahead unless the ductwork runs through that space, and the estimate puts that choice in writing.

How much roof insulation does Washington's energy code list for commercial buildings?

Washington's commercial energy code table lists R-38 continuous insulation for roofs with all the insulation above the deck and R-49 for attics and other roofs. R-value is how well insulation slows heat, and your roof type decides which figure a bid should name. A building with apartments or other living space in one part can follow different values there, so we confirm which values apply to your project before we write the bid.

What causes a commercial wall to lose R-value through the framing?

Heat moves through the studs faster than through the insulation between them, so the whole wall performs worse than the label on the batts says. In one training guide's worked example, a 2x4 wall with R-13 batts lost about a third of its value and ended up near R-8.7. Insulation that runs continuously across the framing closes those paths, so ask each bidder how they handle the studs.

What should I ask about insulation for a metal building?

Ask how the crew handles the spots the label doesn't cover. One industry specification says its R-values describe the insulation alone and leave out facings, the places where the insulation gets squeezed at the framing, and the heat that moves through metal fasteners. How the job is installed decides those spots, so a bid should say how it treats them.

Does my insulation contractor need to be registered in Washington?

Yes. Washington requires every construction contractor to register with the Department of Labor & Industries, and state law requires them to be bonded and insured. You can look up any firm through Labor & Industries before you hire, and since the law requires the registration number on estimates and bid proposals, check that every bid you get shows one.

How do I schedule insulation around electrical, plumbing and HVAC work?

Finish the electrical, plumbing and HVAC work that passes through the insulation first, if you can. One training guide advises that, or else planning ahead for where other trades might damage the insulation and how it gets repaired. Tell us what's still planned when I come out, and the estimate will show where our work falls in that order.

Commercial insulation in Kennewick's dry climate

Washington's energy code places Benton County, Kennewick included, in climate zone 5B, where the B means a dry climate, and the state's commercial insulation values are set by zone. We confirm which values apply to your building before we write the bid, and we do the same on jobs in Pasco, Richland and the other cities around us on both sides of the state line.

For local questions about your building, the City of Kennewick takes them through its One Stop email, or you can call City Hall at 509-585-4200 from 8:30 a.m. to 4:30 p.m., Monday through Friday. Rules differ from one city to the next, so we ask the office rather than assume.